Ileyithe ethe tyaba ePhakamileyo eNgcono kunye neLathe yeNjini yoMsebenzi oMnzi
* Uphawu
- Umhlaba ochanekileyo kunye ne-supersonic frequency hardened bed way yenzelwe kwisakhiwo sodonga oluphindwe kabini, inika ubulukhuni obugqwesileyo.
- Inkqubo yokuphotha iphezulu ekuqineni nasekuchanekeni.
- Uyilo lokuqhuba okuphambili luphuculwe kwaye iigiya kwi-headstock ngumhlaba ochanekileyo.
- yena ingxolo yomatshini iphantsi.
- Akukho mfuneko yokutshintsha izixhobo.
- Lo matshini unokujika malunga neentlobo ezingama-200 zemetric, ixabiso elililo, imodyuli kunye nemisonto yeDP.
- Isixhobo sokumisa ngokuzenzekelayo sisetyenziselwa ukuqaphela ukumisa ngokuzenzekelayo kumatshini womsebenzi othile wobude, okhuselekileyo.
- Isixhobo sokunyathela isiqhoboshi esibonelela ngokuyeka ngokukhawuleza nangempumelelo ngelixa usebenza.
| Umzekelo | L5841x1000 | L5841x1500 |
| Jingi phezu kwebhedi | Φ410mm(16") | Φ410mm(16") |
| Jiwunga kwisilayidi esinqamlezayo | Φ224mm(8 13/16") | Φ224mm(8 13/16") |
| Swing in gap(D×W) | 640mm×218mm | 640mm×218mm |
| Ubude beziko | 205mm(8 5/64") | 205mm(8 5/64") |
| Umgama phakathi kwamaziko | 1015mm | 1515mm |
| Ububanzi bebhedi | 300mm(11 3/4") | 300mm(11 3/4") |
| Max.icandelo lesixhobo sokusika | 25mm×25mm(1"×1") | 25mm×25mm(1"×1") |
| Uhambo lulonke lwesilayidi esinqamlezileyo | 290mm(11 3/8") | 290mm(11 3/8") |
| Uhambo lulonke lwesilayidi esiphezulu | 120mm(4 3/4") | 120mm(4 3/4") |
| I-Spindle bore | Φ82mm(3 1/4") | Φ82mm(3 1/4") |
| Impumlo yokusonta | D1-8 | D1-8 |
| I-spindle morse taper empumlweni, emkhonweni | ME90/MT#5 | ME90/MT#5 |
| Inombolo yezantya zomsinga | 12 | 12 |
| Uluhlu lwezantya zokusonta | 25-2000 RPM | 25-2000 RPM |
| Imisonto pith zasebukhosini | 4-112(50 NOS) | 4-112(50 NOS) |
| Imisonto yemetric pith | 0.25-7(24 NOS) | 0.25-7(24 NOS) |
| Iimpawu zeDiametral DP / DP | 4-112(50 NOS) | 4-112(50 NOS) |
| I-diametral pitches MP / MP | 0.25-14(34 NOS) | 0.25-14(34 NOS) |
| Uhambo lulonke lwe-tailstock quill | 120mm(4 3/4") | 120mm(4 3/4") |
| Imisila stock quill | Φ60mm(2 3/8") | Φ60mm(2 3/8") |
| I-Taper tailstock quill | MT#4 | MT#4 |
| Spindle drive motor | 7.33HP(5.5KW) | 7.33HP(5.5KW) |
| Injini yepompo epholileyo | 4/75HP(0.04KW) | 4/75HP(0.04KW) |
| Ubungakanani bomatshini | 88"×36"×49" | 110"×36"×49" |
| Ubungakanani bokupakisha | 93"×39"×62" | 114"×39"×62" |
| NW | 1680kg | 2010kg |
| GW | 1930kg | 2260kg |
| INOMBOLO YENTO. | 114045 | 114046 |
